Today I\u2019m going to show you how to sew fabric belt loops<\/strong>in a simple and effective way, so your summer creations look flawless.<\/p>\n At the end of this blog, you\u2019ll find the video<\/strong> in case you want to see how I did it.<\/p>\n Cut a strip of fabric that is easy to handle in width (the exact width isn\u2019t very important since you\u2019ll trim it later) and as long as you need.<\/p>\n Fold the fabric strip lengthwise,<\/strong>right sides together, and press it with an iron.<\/p>\n Start sewing by making a \"V\" about 2 to 3 centimeters long, then continue sewing straight about 4-5 millimeters from the edge.<\/p>\n Once your strip is sewn, trim along the seam leaving about 4-5 millimeters of fabric. This leftover fabric is what will later fill the inside of the belt loop.<\/p>\n nsert the bias tape maker through the narrowest end (the opposite end to the \u201cV\u201d-shaped sewn funnel). Hook the fabric onto the hook at the end of the bias tape maker, and using your fingers, guide the fabric as you turn it inside out. This step is the most delicate. Do it slowly to avoid the fabric slipping off the hook. Once the fabric starts to show through, you can release the hook and finish turning the strip with your hands.<\/p>\n The resulting cord can be used to make straps for your summer dresses, but in this case, I\u2019ll show you how to make belt loops.<\/p>\n Cut several pieces to the size you need (this will depend on whether you want the belt loops to hold a ribbon or to use buttons. The size of the belt loop will depend on the size of the button you use). Fold the belt loops and place them on the right side of the fabric. Sew each one to secure them to the fabric. Next, place the other piece of fabric on top, right sides together, and sew with a 1-centimeter seam allowance. Turn it right side out and press the whole piece. Finish by sewing a topstitch about 5 millimeters from the edge.<\/p>\n Use lightweight but sturdy fabrics like linen, poplin, or cotton. If you\u2019re working with a very thin or drapey fabric, you can make the belt loops a bit wider so they keep their shape.<\/p>\n All done! Now you have your belt loops sewn or your thin straps ready to wear on your lightest garments. Ready to give it a try? If you make this project, tag me in your photos so I can see how it turned out!<\/p>\nMaterials You Will Need:<\/h4>\n
\n
Step 1: Cut the fabric<\/h4>\n
![\"como](\"https:\/\/makingpatternsfly.com\/wp-content\/uploads\/2025\/06\/hacer-trabillas1-01.jpg\")
<\/a><\/p>\n
\nStep 2: Iron and prepare<\/h4>\n
<\/a><\/p>\n
\nStep 3: Sew<\/h4>\n
<\/a><\/p>\n
\nStep 4: Trim the excess fabric<\/h4>\n
<\/a><\/p>\n
\nStep 5: Turn the strip<\/h4>\n
<\/a>\u00a0 \u00a0 <\/a><\/p>\n
\nStep 5: Cut the belt loops<\/h4>\n
\u00a0 <\/a><\/a><\/p>\n\u00a0\u00a0\u00a0\u00a0\u00a0<\/a> <\/a><\/p>\n
\nExtra tip:<\/h3>\n
Final result<\/h3>\n
I\u2019ve also prepared a video for you in case you prefer watching over reading:<\/h4>\n